NEC 10930 95 User Manual

NEC 10930 95 User Manual

Multibutton telephone
Table of Contents

Advertisement

Empowered by Innovation
Multibutton Telephone
User Guide
1093095
Rev 1, May 2006
.
Printed in U.S.A

Advertisement

Table of Contents
loading

Summary of Contents for NEC 10930 95

  • Page 1 Empowered by Innovation Multibutton Telephone User Guide 1093095 Rev 1, May 2006 Printed in U.S.A...
  • Page 2 The handset cord routes through the lower channel on the right side of the telephone base. 3. The line cord does not use a channel and drapes down from the telephone line cord jack or connects to the telephone legs. To set the low viewing angle position:...
  • Page 3: How To Use This Guide

    – Push and hang up. See A Quick Telephone Tour on the next page for a quick tour of your telephone’s layout and keys. To remove the faceplate (if installing a custom DESI label): Put your finger in the recessed area under the faceplate and lift off the faceplate.
  • Page 4 HOTLINE + + Dial co-worker’s extension number + HOLD twice to exit. (See the Telephone Feature Handbook for more Feature Key types you can set up.) SPEAKER To call or Transfer your call to a co-worker: – While on the call, press the Hotline Key. (The key lights red while your co-worker is busy, flashes red if in DND.) –...
  • Page 5 + Press bin key + + Enter the number you want to store + To call the stored number: – Press bin key. (See the Telephone Feature Handbook for more on Speed Dial.) TRANSFER – Press + Dial co-worker’s extension to Transfer your call.
  • Page 6: Outside Calls

    Outside Calls To answer an outside call: Lift the handset. If you are not automatically connected, press flashing line key. – If you hear a call ringing a co-worker, dial ** and their extension number to pick it up. To place an outside call: Press a line key (normally located on your first two rows of Feature Keys).
  • Page 7 – The Hotline key is off when your co-worker is idle, on if busy, and flashing if in Do Not Disturb. – See the Telephone Feature Handbook for more Feature Key types you can set up. If the co-worker you call is busy:...
  • Page 8: Place A Call On Hold

    Place A Call On Hold To place your call on System (Regular) Hold: (Your co-workers can pick up calls you place on System Hold.) Press HOLD – While an outside call is on Hold, the line key will flicker (green). –...
  • Page 9 B/NA – for Call Forwarding when Busy or Not Answered. More Offp for Call Forwarding Off Premises. See the Telephone Feature Handbook for more. – for Answering Machine Emulation. See the IntraMail Feature Handbook for more. More – for Selectable Display Messaging. See the Telephone Feature Handbook for more.
  • Page 10 Dialing By Name (Directory Dialing) To dial a co-worker or outside call by selecting from a group of names: Push Dir. Select a Directory Dialing type: – To call a co-worker, push Ext. – To call a Personal Speed Dial number, push Pers. –...
  • Page 11 Change Ring Tones For Specific Feature Keys To turn Feature Key ringing on and off: (These steps apply to line keys, Call Coverage keys, and Group Call Pickup keys. See the Telephone Feature Handbook for more on setting up Feature Keys.) Do one of the following: –...
  • Page 12 Plug the headset cord into the headset jack on the bot- tom of the telephone. The headset cord routes through the upper channel on the right side of the telephone base. To set up a headset Feature Key: Dial #KP (#57...
  • Page 13 Removing Lines and Extensions from Service Remove problem lines from service – and return them to service once corrected. (See the Telephone Feature Handbook for more on these features.) Using A DSS Console For more call handling power and flexibility, the DSS Console pro- vides 60 additional Feature Keys as well as three Speed Processing Keys along the bottom.
  • Page 14 Programming Your Extension’s Name To program your extension’s name: Menu More More Push Enter the name following the Name Programming Chart below + Press – Also use this procedure to program Personal Speed Dial names and Display Messages. 1 Press 2 Presses &...
  • Page 15 #KP + Press key you want to program + HOLD + INTERCOM + Press VOLUME to select key option + HOLD + (Enter any additional data + HOLD – see the Telephone Feature Handbook) + SPEAKER twice to exit. #RLP + Y to enable or N to disable + #757 #SP + Dial bin number or press bin key + HOLD + Dial outside line (e.g.,...
  • Page 16 Calling (Logging Into) Your Mailbox Voice Mail lets callers leave recorded messages for you and lets you leave recorded messages for co-workers. Messages get stored in each person’s mailbox. To listen to your messages or use other voice mail features, you call your mailbox and access the Main Menu.
  • Page 17 Review these basic features before using your mailbox for the first time. To record a greeting for your mailbox: (Callers hear your greeting before leaving you a message.) or push VM:xx. Press V-MAIL Push Greet. – If you want calls from your company’s Automated Attendant to go directly to your mailbox (with- out first ringing your phone), dial the letter Push Gr1, Do one of the following:...
  • Page 18 More Mailbox Features When you log onto your mailbox, you get your mailbox main menu of options. These additional features are avail- able from your main menu. To record and send a message to a co-worker: or push VM:xx. Press V-MAIL Push Rec.
  • Page 19 After listening to a message, to have voice mail announce the message sender, as well as the time and date the message was sent to you: or push VM:xx. Press V-MAIL 2. Push Time. 3. Do one of the following: –...
  • Page 20 Mbox (to turn the feature on or off) or + Push Lstnto listen, Recto record, or Eraseto erase. ) + Push Lstnto listen, Recto record, or Eraseto erase. NEC Unified Solutions, Inc. 4 Forest Parkway, Shelton, CT 06484 203-926-5400 203-929-0535...

This manual is also suitable for:

Dsx multibutton telephoneDsx

Table of Contents