1622-Outgoing; 1622-01: Loop Disconnect Timer; 1622-02: Ring/Mw Wait Period Time - NEC DSX Software Manual

16xx-Timers
162x-SLI (Analog Single Line) Timers

1622-Outgoing

1622-Outgoing
Description
Use this program to adjust the timers that affect outgoing calls from analog single line telephones.
Options

1622-01: Loop Disconnect Timer

(Loop Disconnect)
Use this option to determine how long the single line PCB opens the loop to the connected analog device
after the far end disconnects. This timer is used only if 1403-06: Loop Disconnect for Single Line Set
(page 636) is enabled in the extension's Class of Service.
Features
• None
IntraMail Features
• None
Options
• 50-12750 mS
Default
• 2000 mS

1622-02: Ring/MW Wait Period Time

(MW Period)
Use this option to determine the ringing sequence for the devices connected single line PCBs. Because of
power consumption, it is not possible to ring all analog devices on a PCB simultaneously. Instead, the card is
divided into 4 groups with two ports in each group. Ringing cycles between the 4 groups, ringing each group
for this interval.
Features
• None
IntraMail Features
• None
Options
• 50-12750 mS
Default
• 750 mS
694 ◆ System Options: 1001-1702
DSX Software Manual