NEC DSX Software Manual page 280

Names for Extensions and Lines
2201-01: Ring Group Name (page 779)
❥
2301-01: UCD Group Name (page 790)
❥
2501-[01-16]: Selectable Display Messages (page 806)
❥
3101-02: Line Name (page 810)
❥
4111-01: Voice Mail Port Name (page 865)
❥
904x-Backup/Restore (page 927)
❥
Other Related Features
See list under Description above.
Operation
To program your extension's name:
• If you have access level 4 or 5, use "To program a name for a co-worker's extension . . ." below instead.
[Menu + Name]
1.
[Menu + MORE + MORE + Name]
2. Follow the instructions in the Name Programming Chart below.
3. Press HOLD + SPEAKER to exit.
To program a name for a co-worker's extension, a Ring Group, or a UCD Group:
[Menu + Name]
1.
[Menu + MORE + MORE + Name]
2. When you see
EXT:xxx
a. Enter the name of the extension you want to program + HOLD .
b. Press HOLD to accept the displayed name.
c. Enter the master number for the Ring Group you want to program + HOLD .
d. Enter the master number for the UCD Group you want to program + HOLD .
3. Follow the instructions in the Name Programming Chart below.
4. Do one of the following.
Press HOLD to back up to step 2 and program another name.
a.
b. Press HOLD + SPEAKER to exit.
250 ◆ Features
Programming Names
Select name programming.
Select name programming.
, do one of the following.
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
DSX Software Manual