NEC DSX Software Manual page 556

Make Call
To enable Make Call for remote logons (i.e., subscriber's logging onto their mailbox through the
5.
Automated Attendant):
In 3103-04: Tandem Calls (page 816), enter Yes to enable Tandem Calls.
1.
- Enable this option for either the inbound or outbound lines (or both).
Other Related Features
Features
None
IntraMail Features
Caller ID and Voice Mail (page 456)
Make Call for outside calls is available only if the telco provides Caller ID to the telephone system
and the telephone system passes the Caller ID data to the IntraMail voice mail ports.
Message Reply (page 545)
Message Reply can not automatically reply to a message left by an outside caller. Use Make Call
instead.
Operation
Log onto Subscriber Mailbox.
Listen to the message for which you want to make a return call.
(5)
L
[Listen] - [Lstn]
MC (62)
526 ◆ IntraMail Features
Using Make Call from your Mailbox
[Super Display Soft Key] - [Keyset Soft Key]
Dial this code while listening to the message you want to return.
[Callback] - [N/A]
• Make Call automatically places a return call to the co-worker that left you the message.
• If your system has Caller ID, Make Call can automatically place a return call to your out-
side caller.
• If you hear "Your call cannot go through," your system's Caller ID is not properly set up.
You go right back to the listen mode for the message you were listening to when you tried
the Make Call.
DSX Software Manual