NEC DSX Software Manual page 55

Programming
For best performance, install a 34-Button Display or 34-Button Super Display telephone for the
1.
attendant.
1. A DSS Console will also help the attendant process calls more quickly.
2. Set up the system attendants (operators).
For a single operator:
1.
- In 1501-01: Number of Operators (page 652), enter
- In 1502-01: Operator Number 1 (page 653), enter the extension number for operator 1.
- If you omit this step, by default users can dial 0 for extension 300 bit it won't be an operator.
- In 2114-03: Station's Operator Extension Number (page 744), for each extension enter operator 1's
extension number.
For multiple operators:
2.
- In 1501-01: Number of Operators (page 652), enter the number of operators you need (
- In 1502-01: Operator Number 1 (page 653), enter the extension number for operator 1.
- In 1502-02: Operator Number 2 (page 653), enter the extension number for operator 2.
- In 1502-03: Operator Number 3 (page 653), enter the extension number for operator 3.
- In 1502-04: Operator Number 4 (page 654), enter the extension number for operator 4.
- In 2114-03: Station's Operator Extension Number (page 744), assign an operator to each extension.
For no operators:
3.
- In 1501-01: Number of Operators (page 652), enter
- In 2114-03: Station's Operator Extension Number (page 744), remove the assignment for each
extension.
While busy on a call, should the attendant get Off-Hook Signaling audible notification of
3.
incoming calls?
1. If yes:
- In 2116-03: Off Hook Signaling for Incoming Outside Calls (page 750), for the attendant's exten-
sion enter
If no:
2.
- In 2116-03: Off Hook Signaling for Incoming Outside Calls (page 750), for the attendant's exten-
sion enter
4. Should 0 (or 01-04 in multiple-operator systems) be the digit users dial to reach their operator?
If yes, leave the following at their factory default values:
1.
- In 1301-[01-10]: Function Type (page 620), digit 0 =
- In 1301-[01-10]: Expected Number of Digits (page 620), digit 0 =
If no:
2.
- In 1301-[01-10]: Function Type (page 620), assign the new digit Function Type
- In 1301-[01-10]: Expected Number of Digits (page 620), for the new digit enter
DSX Software Manual
1 for Camp-On or 2 for Off-Hook Ringing.
0 .
Attendant Position
1 .
0 .
1 (Operator).
2 .
Features ◆ 25
2-4 ).
1 (Operator).
.
2