User Programmable Feature - NEC DSX Software Manual

Operation
To connect the headset:
1. Plug a compatible headset into the telephone headset jack.
To turn the headset mode on and off:
1. Do one of the following.
a. Press the headset Feature Key on your telephone or DSS Console.
b. Use the User Programmable Features (see below).
While in the headset mode:
1. You can do the following.
Press a line key to place or answer an outside call.
a.
Press INTERCOM
b.
If on a call, press
c.

User Programmable Feature

Feature
Headset Compatibility
DSX Software Manual
Using the Headset
to get Intercom dial tone.
to hang up.
SPEAKER
Turning the Headset Mode On and Off
Mnemonic
#HS (#47) + to enable or
#HS Y
Headset Compatibility
Operation
to disable + to exit.
N SPEAKER
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
Access Level
3-5
Features ◆ 201