NEC DSX Software Manual page 97

Operation
To cancel (clear) the Caller ID display and return your phone to its normal display:
• You can only do this while you are on a call, not while your phone is ringing.
Press .
CLEAR
1.
To turn the Caller ID display back on (after you press CLEAR to cancel it):
Press .
CHECK
1.
To display the Caller ID data for the third party's call:
Press INTERCOM +
1.
Press one of the following keys for the call you want to check.
2.
• You see Caller ID data for the line you select.
Press a line key while the call is ringing or connected to the third party.
Press a loop key while the call is ringing the third party.
Press a Hotline key while the call is connected to the third party.
Press a Call Coverage key while the call is ringing the third party.
Hang up when you are done.
3.
DSX Software Manual
Clearing the Display
Third Party Caller ID
CHECK .
Caller ID
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
Features ◆ 67