Store And Forward; Check Key; Class Of Service; Conference - NEC DSX PRODUCT DESCRIPTION Manual

Store and Forward

Store and Forward is an alternate method of placing outside calls in which the system stores ("collects") the
digits a user dials, waits for the user to finish dialing, and then redials the digits on the selected line. Store
and forward provides Intercom dial tone to the caller as soon as they dial a line access code or press a loop
key, similar to conventional ARS operation. When the user has completed dialing, the system will dial out
the call over the connected line after 6 seconds or when the user dials #. Store and Forward can also be an
advantage when connected to a T1 service that does not provide line dial tone.
Post dialing for Store and Forward calls is also available. After a user dials using Store and Forward, they
can manually dial additional digits. The normal post dialing soft keys (such as AUTO REDIAL [ ALND ] for
Auto Redial) are also enabled.
Store and Forward does not apply to line keys, Direct Line Access, or line dial up (i.e., #9 plus the line
❥
number).
You can use Account Codes with Store and Forward enabled (see Operation below).
❥

Check Key

Quickly check keyset and DSS Console Feature Key assignments.
A keyset user can use the CHECK key to check keyset and DSS Console Feature Key assignments and Per-
sonal Speed Dial bin names.

Class of Service

Customize features and options for extensions and outside lines.
Class of Service (COS) sets various features and options for extensions and outside lines. The system allows
any number of extensions and lines to share the same Class of Service. The Class of Service options are pro-
vided by the following programs:
140x-Station Options
❥
- 1401-Features (page 628)
- 1402-Access (page 633)
- 1403-SLT's (Single Line Telephone Options) (page 635)
- 1404-Caller ID (page 638)
- 1405-Distinctive Ringing (page 641)
- 1406-Call Forwarding Options (page 643)
- 1407-Paging (page 644)
141x-Line Options
❥

Conference

A user can set up a multiple-party telephone meeting without leaving the office.
Conference lets an extension user add additional inside and outside callers to their conversation. The follow-
ing table shows the system's Conference capacities:
32 ◆ Features
1411-Access (page 647)
Description
Conference circuits
Maximum simultaneous users in Conference
(total of all Conferences system-wide)
Capacity
32
32
DSX Product Description