NEC DSX Software Manual page 251

Operation
To redial your last call:
1. Lift the handset.
(Optional) Press an idle line key to preselect a line.
2.
• If you skip this step, the system automatically selects a line from the same group as your initial call.
Press REDIAL .
3.
• If you hear busy tone and your extension has Line Queuing, you can dial
If you hang up, the system converts the queue to a Line Callback.
- With Line Queuing, the number automatically redials when a line is available.
To redial your last call at a 3-line display telephone:
• If you select a line key before going to step 1, the system outdials your most recent call when you press
1. Press REDIAL .
At a 3-line display telephone you see (for example):
LAST 5 DIALED [4]
1-203-926-5400
• The number to the right of the display shows the Last Number Redial record number (1-5). This is the total
number of Last Number Redial calls stored at your extension.
• To return to idle, press
2. (Optional) Press
Volume Up
3. To redial the displayed number, do one of the following.
Press
a. SPEAKER
b. Lift the handset.
The system tries to use the same line as that used for your initial call.
4.
• If that line is busy, the system automatically selects a line from the same group as your initial call.
• If you hear busy tone and your extension has Line Queuing, you can dial
If you hang up, the system converts the queue to a Line Callback.
- With Line Queuing, the number automatically redials when a line is available.
To redial your last call at a Super Display Telephone:
1. Press REDIAL .
At a Super Display telephone you see (for example):
LAST 5 DIALED
1-212-555-1212
1-203-926-5400
411
913-555-8764
555-4113
• To return to idle, press
Press the soft key for the number you want to recall.
2.
• The store number dials out.
DSX Software Manual
Using Last Number Redial
Using Enhanced Last Number Redial
REDIAL again.
or
Volume Down
.
again.
REDIAL
to display the number you want to call.
Last Number Redial
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
2 to queue for a line to become free.
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
REDIAL
2 to queue for a line to become free.
Features ◆ 221
.