NEC DSX Software Manual page 952

90xx-Utilities
902x-Copy
9021-Station Copy
To copy data from an extension to another extension or range of extensions:
1. Access option 9021-01. You see:
Press HOLD and select the option (01-23) corresponding to the station program you want to copy.
2.
• You can dial the option number (01-23) or press Volume Up and Volume Down to scroll through the selections.
3. Press HOLD . You see:
Enter the source extension number + HOLD . You see:
4.
• This is the extension from which the data will be copied.
Enter the target extension number + HOLD . You see:
5.
• This is the extension to which the data will be copied.
• If you are copying data to a range of extensions, this is the first (lowest) extension in the range.
6. Do one of the following.
a. If copying data to a single extension, re-enter the extension you entered in step 5 above + HOLD .
b. If copying data to a range of extensions, enter the highest (last) extension in the range + HOLD .
7. When the copy has successfully completed, you see:
922 ◆ Maintenance Options: 9001-9211
Using 9021-01: Station Copy
Copy Program
From Extension
To Extension
Thru Extension
Copy Complete
DSX Software Manual