NEC DSX Software Manual page 105

Programming
Basic Programming
Make sure each line's circuit type and loop length setting match the requirements of the
1.
connected service.
1. In 3101-01: Line Type (page 809), set the circuit type to match the connected service.
2. In 3101-03: DTMF Dialing (page 811), indicate whether the line is DTMF (
In 3103-03: Loop Length (page 815) for analog lines only, set this option to compensate for the telco cir-
3.
cuits loop length.
- For normal installations, enter
- If the system is very close to the central office or behind a PBX, enter
- If the loop length is abnormally long, enter
2. Review the system timers for compatibility with the connected service.
Review the following timers:
1.
- 160x-Feature Timers (page 669).
- 161x-COI (Analog Line) Timers (page 682).
- 163x-T1/E1 Timers (page 695).
- 164x-T1 Specific Timers (page 700).
- 165x-E1 Specific Timers (page 704).
3. Set the line access options at extension for each line.
1. For no incoming or outgoing access, in 2131-[01-64]: Line Access (page 763) enter
2. For incoming access only, in 2131-[01-64]: Line Access (page 763) enter
For outgoing access only, in 2131-[01-64]: Line Access (page 763) enter
3.
4. For full access, in 2131-[01-64]: Line Access (page 763) enter
4. Set the line ringing options at extension for each line.
1. For lamp only (no ringing) day and night, in 2132-[01-64]: Line Ringing (page 764) enter
For day and night ringing, in 2132-[01-64]: Line Ringing (page 764) enter
2.
3. For night ringing only, in 2132-[01-64]: Line Ringing (page 764) enter
4. For delay ringing day and night, in 2132-[01-64]: Line Ringing (page 764) enter
- In 1604-01: Delay Ring Timer (page 678), set the interval after which a delay ring line will change
from flashing to ringing.
5. For single line telephones:
- In 2102-01: Class of Service (page 724), check the extension's Class of Service level.
- To have single line telephones ring with a single ring for outside calls, in 1403-02: Single Ring for
Single Line Set (page 635) enter
- To have single line telephones follow the ringing pattern of the outside line, in 1403-02: Single
Ring for Single Line Set (page 635) enter
DSX Software Manual
Central Office Calls, Answering
0 .
2 .
3
Yes .
No .
1 ) or Dial Pulse (
1 .
0 .
1 .
.
2
.
1 .
.
2
3 .
4 .
Features ◆ 75
0 ).