1404-04: Caller Id Display Separator; 1404-05: Outgoing Ani Privacy; 1404-06: Caller Id Alert Lamp - NEC DSX Software Manual

Options
• No
•
Yes
Default
• No

1404-04: Caller ID Display Separator

(CID Display "-")
Use this option to enable or disable the Caller ID display separator. If enabled, the telephone displays a dash
separator after the area code and after the local exchange on a 7 or 10 digit number. If disabled, the calling
party number displays without a separator.
Features
• Caller ID (page 63)
IntraMail Features
• None
Options
• No
• Yes
Default
• Yes

1404-05: Outgoing ANI Privacy

(OTG ANI Privacy)
Use this option to enable or disable the extension's ability to send outbound Automatic Number Identifica-
tion (ANI) over E1 lines using MFC dialing. This option only applies to outbound E1 calls using MFC
dialing, and does not apply to systems installed in North America.
Features
• None
IntraMail Features
• None
Options
• No
• Yes
Default
•
Yes

1404-06: Caller ID Alert Lamp

(CID Alert Lamps)
Use this option to enable or disable an extension's Ring/Message Lamp for Caller ID. If enabled, the lamp will
flash whenever the extension receives new Caller ID logs. If disabled, the lamp will not flash for Caller ID.
Features
• Caller ID Logging (page 68)
IntraMail Features
• None
Options
• No
•
Yes
DSX Software Manual
(0) - Disabled
(1) - Enabled
(0) - Disabled
(0) - Disabled
(1) - Enabled
(1) - Enabled
(0) - Disabled
(1) - Enabled
(1) - Enabled
(0) - Disabled
(1) - Enabled
14xx-COS (Class of Service)
System Options: 1001-1702 ◆ 639
140x-Station
1404-Caller ID