No Routing; Pause - NEC DSX Software Manual

42xx-IntraMail
423x-Dial Actions (Dial Action Table Options)
4231-Digit Assignment

No Routing

(N)
Use the N option when you want no Automated Attendant routing to automatically occur. This can be used
with the LOGON action when you want to prompt the caller to enter a mailbox number. To do this for the #
key (for example), for the # key enter LOGON for the Action and N for the corresponding Routing. When the
caller dials #, they hear, "Please enter the mailbox number. Or, to exit, press the pound key."
Features
• None
IntraMail Features
• Dial Action Table (page 465)
Options
• N for no routing (press Feature Key 1)
Default
• See the Dial Action Table Default Settings (page 902).

Pause

(P)
Use the P option when you want the Automated Attendant to pause while dialing. This option is typically used
with the Centrex Transfer feature to give the system adequate time to dial the stored System Speed Dial number.
To set the duration of the pause, use 1602-04: Dial Pause Timer (page 673). The default setting is 1 second.
Features
• None
IntraMail Features
• Centrex Transfer (page 460)
• Dial Action Table (page 465)
Options
• P for pause (press Feature Key 4)
Default
• See the Dial Action Table Default Settings (page 902).
914 ◆ Voice Mail Options: 4101-4231
DSX Software Manual