NEC DSX Software Manual page 321

Operation
To place a call using Reverse Voice Over:
While on a handset call, press and hold your Reverse Voice Over key.
1.
• You hear two beeps, then you can talk to your co-worker.
• The key lights red as you press it.
To return to your initial caller:
Release your Reverse Voice Over key.
1.
• The key goes out.
To place a call to your Reverse Voice Over partner:
While your telephone is idle, press your Reverse Voice Over key.
1.
• You hear two beeps, then you can talk to your co-worker. (Optionally lift handset for privacy.)
• The key lights green.
To Transfer a call using your Reverse Voice Over key:
While on a call, press
1.
2. Press your Reverse Voice Over key.
3. Do one of the following.
• Announce the call to make a Screened Transfer.
a.
• Hang up.
b. Press the flashing line key to return to the call if your co-worker doesn't want it.
Hang up to send the call through unscreened.
c. • The call will recall to you if unanswered at the destination. If you don't answer the recall, it
diverts to Key Ring.
DSX Software Manual
Using Reverse Voice Over
.
TRANSFER
Reverse Voice Over
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
Features ◆ 291