NEC DSX Software Manual page 283

Option 4: DIL Day and Night
The line is a DIL during the day and at night. The DIL destination's
line. Turn to Direct Inward Line (page 109) for more on setting up Direct Inward Lines.
Conditions
• None.
Default Setting
• In DSX-40, keys 1-12 are day/night ringing line keys for lines 1-12 and keys 13-24 are undefined.
• In DSX-80/160, keys 1-8 are day/night ringing line keys for lines 1-8 and keys 9-24 are undefined.
• For attendants:
- Key 12 (on 22-button) or key 24 (on 34-button) is an Operator Call Key.
Programming
1. Should extension be able to put Key Ring lines into the Night Mode?
1. In 2102-01: Class of Service (page 724), check the extension's Class of Service level.
2. If yes, in 1402-05: Activate Night Mode (page 634) enter
- This capability is normally reserved only for attendants.
3. If no, in 1402-05: Activate Night Mode (page 634) enter
2. Set up a System night key on an extension or DSS Console.
To set up a System night key on an extension:
1.
- In 2121-[01 to 24]: Feature Key Codes (page 758), enter
- In 2121-[01 to 24]: Feature Key Data (page 758), press
2. To set up a System night key on a DSS Console:
- In 2402-[01-60]: DSS Console Key Codes (page 801), enter
- In 2402-[01-60]: DSS Console Key Data (page 801), press
3. Should key ring lines ring extensions at night?
1. If yes:
- In 2132-[01-64]: Line Ringing (page 764) enter one of the following:
1
2
3
- For delay ringing (option 4 only), in 1604-01: Delay Ring Timer (page 678) adjust the Delay Ring
timer as required.
2. If no:
- In 2132-[01-64]: Line Ringing (page 764) enter
DSX Software Manual
for day and night ringing.
for night ringing only.
for delay ringing day and night.
Night Service / Night Ring
DND key controls the night mode of the
Yes .
No .
18 .
.
CLEAR
.
18
.
CLEAR
0 for lamp only (no ringing).
Features ◆ 253