1612-Outgoing; 1612-01: Dp Break Timer; 1612-02: Dp Make Timer; 1612-03: Dp Interdigit Timer - NEC DSX Software Manual

1612-Outgoing

Description
Use this program to adjust timers that affect outgoing calls on the line (COIU) PCBs.
Options

1612-01: DP Break Timer

(Break Time)
Use this timer to set the duration of the Dial Pulse Break signal (i.e., relay open). This is the "off" time in a
Dial Pulse digit. Set this timer for compatibility with the connected telco or PBX/Centrex. Keep in mind that
there are three components of a Dial Pulse digit: Make interval, Break interval and Interdigit interval. An
improper setting may cause misdialing.
Features
• Central Office Calls, Placing (page 78)
IntraMail Features
• None
Options
• 4-1020
Default
• 60 mS

1612-02: DP Make Timer

(Make Time)
Use this timer to set the duration of the Dial Pulse Make signal (i.e., relay closed). This is the "on" time in a
Dial Pulse digit. Set this timer for compatibility with the connected telco or PBX/Centrex. Keep in mind that
there are three components of a Dial Pulse digit: Make interval, Break interval and Interdigit interval. An
improper setting may cause misdialing.
Features
• Central Office Calls, Placing (page 78)
IntraMail Features
• None
Options
• 4-1020
Default
• mS
40

1612-03: DP Interdigit Timer

(Interdigit Time)
Use this timer to set the duration of the Dial Pulse Interdigit signal (i.e., relay open time between each digit).
Set this timer for compatibility with the connected telco or PBX/Centrex. Keep in mind that there are three
components of a Dial Pulse digit: Make interval, Break interval and Interdigit interval. An improper setting
may cause misdialing.
Features
• Central Office Calls, Placing (page 78)
IntraMail Features
• None
DSX Software Manual
mS
mS
16xx-Timers
161x-COI (Analog Line) Timers
System Options: 1001-1702 ◆ 685
1612-Outgoing