2314-(Auto-Attendant) Automated Attendant; 2314-01: Auto Attendant Do Not Disturb; 2314-02: Forced Unscreened Transfer; 2314-03: Dialing Option - NEC DSX Software Manual

23xx-UCD Groups
231x-IntraMail (UCD Group Mailbox)

2314-(Auto-Attendant) Automated Attendant

2314-(Auto-Attendant) Automated Attendant
Description
Use this program to set up the Automated Attendant options for the UCD Group Mailbox.
Options

2314-01: Auto Attendant Do Not Disturb

(Auto-Att DND)
Use this option to enable or disable Auto Attendant Do Not Disturb for the Hunt Group Mailbox. When a
subscriber enables Auto Attendant Do Not Disturb, an Automated Attendant caller will route directly to the
mailbox, hear the greeting, and be asked to leave a message.
Features
• None
IntraMail Features
• Auto Attendant Do Not Disturb (page 427)
• Group Mailbox (page 497)
Options
• No (0) - Disabled
• Yes (1) - Enabled
Default
• No (0) - Disabled

2314-02: Forced Unscreened Transfer

(Force UTRF)
Use this option to enable or disable Automated Attendant Forced Unscreened Transfer for the Subscriber
Mailbox. If enabled, each Screened Transfer (STRF) to the mailbox is converted to an Unscreened Transfer
(UTRF). If disabled, Screened Transfers from the Automated Attendant occur normally.
Features
• None
IntraMail Features
• Forced Unscreened Transfer (page 489)
• Group Mailbox (page 497)
Options
• No (0) - Disabled
• Yes (1) - Enabled
Default
• No (0) - Disabled

2314-03: Dialing Option

(Dialing Option)
Dialing Option provides additional dialing options for Next Call Routing Mailbox calls (see 2314-03: Dial-
ing Option below). If enabled, a caller who accesses the Subscriber Mailbox to leave a message can dial any
of the options in the Next Call Routing Mailbox's Dial Action Table. If disabled, the caller can only dial 0 (to
use the Next Call Routing Mailbox's 0 action).
Features
• None
798 ◆ Station Options: 2101-2501
DSX Software Manual