Access Code Options - NEC DSX Software Manual

Access Code Options

1. Should extension have single digit (dial 9) or 2-digit (90-98) access to outside Line Groups?
For single digit access:
1.
- In 1301-[01-10]: Function Type (page 620), check to be sure the digit 9 is type
- In 1301-[01-10]: Expected Number of Digits (page 620) for the digit 9, enter
- In 2113-01: Dial 9 Group (page 738), assign the Line Group the extension will reach when the user
dials
2. For 2-digit access:
- In 1301-[01-10]: Function Type (page 620), check to be sure the digit 9 is type
- In 1301-[01-10]: Expected Number of Digits (page 620) for the digit 9, enter
- You can optionally set up the digit 9 for single digit access and another digit (e.g., 8) for 2-digit access.
2. Should extension have Line Dial-Up capability?
If yes, in 2111-06: Line Dial Up (page 732) enter
1.
2. If no, in 2111-06: Line Dial Up (page 732) enter
3. Should 1 be the first digit in the Direct Line Access code?
1. If yes, leave the following at their default values:
- 1301-[01-10]: Function Type (page 620) for the digit 1.
- 1301-[01-10]: Expected Number of Digits (page 620) for the digit 1.
- 1313-01: Line Extension Number (page 625).
2. If no:
- In 1301-[01-10]: Function Type (page 620) for the new Direct Line Access digit, enter
- In 1301-[01-10]: Expected Number of Digits (page 620) for the new Direct Line Access digit,
enter
- In 1313-01: Line Extension Number (page 625), assign the new line extension numbers.
Setting Up Line and Loop Keys
1. Set up line and loop keys for an extension.
1. For line keys:
- In 2121-[01 to 24]: Feature Key Codes (page 758), enter
- In 2121-[01 to 24]: Feature Key Data (page 758), enter the line number (
- If an extension doesn't have any line keys, you should assign Fixed or Switched Loop keys to
make handling outside calls easier.
2. For Fixed Loop keys:
- In 2121-[01 to 24]: Feature Key Codes (page 758), enter
3. For Switched Loop keys:
- In 2121-[01 to 24]: Feature Key Codes (page 758), enter
- In 2121-[01 to 24]: Feature Key Data (page 758), enter the Line Group number (
2. Set up line keys for a DSS Console.
1. For line keys:
- In 2402-[01-60]: DSS Console Key Codes (page 801), enter
- In 2402-[01-60]: DSS Console Key Data (page 801), enter the line number (
- Loop keys are not available on a DSS Console.
DSX Software Manual
9 .
3 .
Central Office Calls, Placing
.
Yes
No .
03 .
.
01
.
02
.
03
3 (Line Group).
.
1
3 (Line Group).
2 .
2 .
1-64 ).
90-98 ).
1-64 ).
Features ◆ 81