NEC DSX Software Manual page 318

Removing Lines and Extensions from Service
Operation
Removing Lines and Extensions from Service
To remove or return an extension or line to service:
1. Press INTERCOM .
2. Dial #40 .
3. Do one of the following.
Dial the number of the extension you want to remove or return to service (e.g., 302).
a.
b. Dial the extension number of the line you want to remove from service (e.g., 101 for line 1).
4. Do one of the following.
Dial 4 to return the line or extension to service.
a.
Dial 6 to remove the line or extension from service.
b. • At the extension removed from service, you see
• The line key for a line removed from service will be on (red).
Press SPEAKER to hang up.
5.
288 ◆ Features
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
.
Out of Service
DSX Software Manual