Mac-Address-Table Aging-Time - SMC Networks 6724AL2 Management Manual

mac-address-table aging-time

Use this command to set the aging time for entries in the address table.
Use the no form to restore the default aging time.
Syntax
mac-address-table aging-time seconds
seconds - Time in number of seconds (10-30000).
Default Setting
300 seconds
Command Mode
Global Configuration
Command Usage
The aging time is used to age out dynamically learned forwarding
information.
Example
Console(config)#mac-address-table aging-time 300
Console(config)#
A T
DDRESS ABLE
C
OMMANDS
3-103