3Com MSR 50 Series Configuration Manual page 280

280 C 12: GVRP C
HAPTER ONFIGURATION
<DeviceB> system-view
[DeviceB] gvrp
# Configure port Ethernet 1/1 as a trunk port, allowing all VLANs to pass.
[DeviceB] interface ethernet 1/1
[DeviceB-Ethernet1/1] port link-type trunk
[DeviceB-Ethernet1/1] port trunk permit vlan all
# Enable GVRP on Ethernet 1/1.
[DeviceB-Ethernet1/1] gvrp
[DeviceB-Ethernet1/1] quit
# Create VLAN 3 (a static VLAN).
[DeviceB] vlan 3
3 Verify the configuration
# Display dynamic VLAN information on Device A.
[DeviceA] display vlan dynamic
No dynamic vlans exist!
# Display dynamic VLAN information on Device B.
[DeviceB] display vlan dynamic
No dynamic vlans exist!