3Com MSR 50 Series Configuration Manual page 268

268 C 11: MP FR
HAPTER O
[RouterA] traffic behavior liuliang
[RouterA-behavior-liuliang] queue af bandwidth 20
[RouterA-behavior-liuliang] quit
# Configure class dial.
[RouterA] traffic classifier dial
[RouterA-classifier-dial] if-match acl 3002
[RouterA-classifier-dial] quit
# Configure class dial corresponding behavior
[RouterA] traffic behavior dial
[RouterA-behavior-dial] queue ef bandwidth 10 cbs 1500
[RouterA-behavior-dial] quit
# Configure policy.
[RouterA] qos policy liuliang
[RouterA-qospolicy-liuliang] classifier liuliang behavior liuliang
[RouterA-qospolicy-liuliang] classifier dial behavior dial
[RouterA-qospolicy-liuliang] quit
# Create and configure virtual template interface Virtual-Template 1.
[RouterA] interface irtual-template 1
[RouterA-Virtual-Template1] ppp mp virtual-template 3
[RouterA-Virtual-Template1] quit
# Create and configure virtual template interface Virtual-Template 2.
[RouterA] interface virtual-template 2
[RouterA-Virtual-Template2] ppp mp virtual-template 3
[RouterA-Virtual-Template2] quit
# Create and configure virtual template interface Virtual-Template 3.
[RouterA] interface virtual-template 3
[RouterA-Virtual-Template3] ppp mp lfi
[RouterA-Virtual-Template3] qos max-bandwidth 64
[RouterA-Virtual-Template3] ip address 1.1.6.1 255.255.255.0
# Cancel fast forwarding defined in virtual template (CBQ is not supported when
fast forwarding is enabled).
[RouterA-Virtual-Template3] undo ip fast-forwarding
[RouterA-Virtual-Template3] quit
# Map specified DLCI to PPP virtual template on the interface.
[RouterA] interface serial 2/0
[RouterA-Serial2/0] fr dlci 100
[RouterA-fr-dlci-Serial2/0-100] quit
[RouterA-Serial2/0] fr map ppp 100 interface virtual-template 1
[RouterA-Serial2/0] fr dlci 200
[RouterA-fr-dlci-Serial2/0-200] quit
[RouterA-Serial2/0] fr map ppp 200 interface virtual-template 2