Switching To Multi-Task Mode; Selecting Tasks - Omron ZS-HL User Manual

Switching to Multi-Task Mode

Select "Single-Task mode" when you perform one measurement processing for
onesensing, and select "Multi-Task mode" when you measure and judge multiple
characteristic points simultaneously.
FUN Mode-[SYSTEM]-[MULTI-TASK]
Setting
OFF
ON
Differences in the menu tree according to the mode p.16

Selecting Tasks

When you set [MULTI-TASK] to ON, select the task number and then specify the various
settings. The following describes the method of selecting the task number.
FUN Mode
1.
Press the MENU key to display the
TOP menu.
2.
Press the ESC key.
The TASK selection menu will be
displayed.
3.
Select the task number.
The currently selected task is displayed
on the sub-display.
Single-Task mode is selected. (default value)
Multi-Task mode is selected.
Using the Multi-Task Function
Description
1 SENSING
3 FILTER
1 TASK1 2
3 TASK 3 4
Section5
2 MEASURE
TAS K2
TAS K4
ZS-HL
5-5
User's Manual