Omron ZS-HL User Manual page 116

Section6
Settings for Terminal Block Output
• When multiple tasks are output continuously
The TASK number is assigned for the lower 2 bits. Thus, the result is output for the
measured value as data in which 2 bits are rounded up.
b15 b14 b13 b12 b11 b10
When FOCUS is set, only the measurement that reflects the FOCUS setting is output.
Example:
b15 b14 b13 b12 b11 b10
0 0
■ When the judgment is output
• When Multi-Task is ON
b15 b14 b13 b12 b11 b10
Judgment result
• When Multi-Task is OFF
b15 b14 b13 b12 b11 b10
b0,4,8,12
b1,5,9,13
b2,6,10,14
b3,7,11,15
ZS-HL
6-12
User's Manual
b9
Binary data of the measured value
The result rounded up to 2 bits (1/4 the value)
When FOCUS is set for the first point (measured value 0.000 → output value 00000)
and second value (measured value 10.000 → output value 20000).
When the measurement result is 5000, 10000 is output in binary.
b9
1 0 0 1 1
10000/4=2500
*Result rounded up to 2 bits (1/4 the value)
Judgment result
for TASK4 for TASK3
Item
Bit
HIGH Turns ON when the judgment result is HIGH.
PASS Turns ON when the judgment result is PASS.
LOW Turns ON when the judgment result is LOW.
ERROR Turns ON when a measurement error occurs.
b8 b7 b6 b5 b4 b3
b8 b7 b6 b5 b4 b3
1 0 0 0 1 0
b9 b8 b7 b6 b5 b4
Judgment result
for TASK2
b9 b8 b7 b6 b5 b4
Judgment result
ERROR LOW PASS
b3 b2 b1
Details
b2 b1 b0
TASK No.
0:TASK1
1:TASK2
2:TASK3
3:TASK4
b2 b1 b0
0 1 1
=10000
TASK No.
b3 b2 b1 b0
Judgment result
for TASK1
b3 b2 b1 b0
The judgment result is
HIGH
expressed in bits in the
b0
order of ERROR, LOW,
PASS, and HIGH from
the left.