Table of Contents
Advertisement
Section2
Sensor Controller
● Installation procedure
1.
Hook the connector end of the Sensor
Controller onto the DIN track.
2.
Push the Sensor Controller down onto
the DIN track until the hook on the I/O
cable side is locked.
Push down until you hear it snap into place.
● Removal procedure
1.
Pull the hook on the I/O cable end of the
Sensor Controller downwards.
2.
Lift up the Sensor Controller from the I/O
cable end, and remove it from the DIN
track.
■ Mounting on a panel
The optional Panel Mount Adapters (ZS-XPM1) can be used to mount the Sensor Con-
troller on a panel.
Panel cutout dimensions p.8-41
1.
Push out the Sensor Controller from the
rear of the panel towards the front.
ZS-HL
2-8
User's Manual
Always hook the connector end of the Sensor Controller on the DIN track first. Hooking the I/
O cable end on the DIN track first may impair the mounting strength of the DIN track attach-
ment.
Hook on connector
Hook on I/O cable
Hook on I/O cable
Panel
H
H
L D
L D
O N
O N
Z E
Z E
P
P
R O
R O
E N
E N
A B
A B
L
L
L E
L E
Hide quick links:
Advertisement
Table of Contents
