Safety Precautions For Using Laser Equipment - Omron ZS-HL User Manual

Smart sensor 2d cmos laser type
Hide thumbs Also See for ZS-HL:
Table of Contents

Advertisement

Section9

Safety Precautions for Using Laser Equipment

Safety Precautions for Using Laser Equipment

Regarding laser devices, classes that indicate dangerous levels and various safety
standards for dangers are stipulated depending on the country of use.
Follow respective standards and implement safety measures.
Class classification
JIS C 6802 (Japan)
EN60825/IEC60825-1 (Europe)
Class2
(*1) Because the safety standards differ according to each country, when you use the Sensor Controller in a
country other than Japan, Europe, and the United States, please check the safety regulations and
standards for lasers of the relevant country.
■ Warning Labels
On the head unit, a label that describes the warning in Japanese is attached. When you
use the Sensor Controller in a country other than Japan, replace the label with the
English label that is provided in the head unit.
● When you use a Sensor Controller in the United States
This product is subject to the U.S. FDA (Food and Drug Administration) laser regula-
tions and is classified to Class 2 stipulated in these regulations.
ZS-LD20T/LD40T/LD50/LD80/LD200 have been already applied for CDRH (Center for
Devices and Radiological Health).
ZS-D20ST/LD50S/LD130/LD350S/LD10GT/LD15GT/HLDS2T/HLDS5T/HLDS10/
HLDS60/ are scheduled to be applied for CDRH (Center for Devices and Radiological
Health).
Products relevant to FDA are supplied with labels that conform to FDA regulations.
When these products are used in the U.S., replace the warning label on the sensor
body with the FDA labels (supplied) referring to the figure below. Make sure that the
labels are affixed at the correct locations as indicated.
The ZS-HLD_ _ _ is intended to be fitted into a system as a terminal device. Follow the
following technical standards when fitting in the device.
* FDA: 21CFR 1040.10 and 1040.11
ZS-HL
9-4
User's Manual
Standards and Class Classification (*1)
Class2
FDA (the United States)
Maximum Output of Laser
Beam
1 mW or less

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents