Omron ZS-HL User Manual page 73

● Bank Switching by Key Operations
FUN Mode-[BANK]-[CHANGE]
1.
Select the bank number.
The current bank number is displayed on the
main display.
● Bank Switching by External Signal Input
You need to change the function assignment for input signals.
- Changing the Assignment of Input Signals p.6-17
- Wiring p.2-10
• You can also switch the bank by entering the CompoWay/F or non-procedural command from Smart-
Monitor ZS.
• If the bank mode is set to [JUDGMENT VALUE], the bank cannot be switched at the external signal
input because the number of banks increases to 32.
Bank Switching (change of device setup)
1 BANK1
3 BAN K3
Section4
2 BAN K2
4 BAN K4
ZS-HL
4-11
User's Manual