Introduction Of The Zs-Hl Series - Omron ZS-HL User Manual

Section 1

Introduction of the ZS-HL Series

Introduction of the ZS-HL Series

The ZS-HLDC Series is a 2D COMS laser type displacement sensor. In addition to ZS-L
full-digital processing, it maximizes sensing performance using a multi-task function.
(1) Enhanced Variation of Sensor Heads
Suitable as a high-end displacement sensor, it supports a wide range of Sensor Heads.
You can perform a stable measurement using a Sensor Head that is suitable for the
workpiece, from 0.001 µm ultra-high-resolution type to 1500-mm ultra-long-range type.
(2) Sensor Controller Incorporating Multiple Functions
For one sensing condition, it incorporates a multi-task function that holds up to a
maximum of four kinds of measurement processing as a "task." Because you can
measure any characteristic point for each task, you can measure and judge multiple
characteristic points simultaneously.
Example: Measure the height and surface fluctuation simultaneously.
(3) Setting Support Software for Personal Computer "SmartMonitor ZS"
It displays data and specifies the settings for the controller that is connected via
"SmartMonitor ZS" bundled with the Sensor Controller (ZS-HLDC_1A). You can
easily check the sensing status and specify the settings in more detail, which cannot
be done using a controller.
ZS-HL
1-2
User's Manual
Sensor Head
(1)
SmartMonitor ZS
(3)
Personal computer
If you use "SmartMonitor ZS Professional," which is sold separately, you can do logging for a
measured value.
LD ON ZERO ENABLE
H
Sensor Controller
P
L
(2)
Surface fluctuation (TASK2)
Height (TASK1)