Setting Display Method
Set what you want to display on the Sensor Controller during measurement in RUN mode.
To set the display method, switch to RUN mode and display the top menu.
Setting the Digital Display
Set what is displayed on the display in RUN mode.
■ Number of digits past the decimal point
Set the number of display digits in the main display and sub-display.
When five or less digits are set, the digits are disabled from the rightmost digit first.
RUN Mode-MENU key-[DIGITAL]-[DOT]
Setting
5th, 4th, 3rd, 2nd, 1st, 0
■ Setting the ECO display
Set the brightness of the main display and sub-displays.
RUN Mode-MENU key-[DIGITAL]-[ECO]
Setting
NORMAL
ECO
OFF
Displaying HELP
Display Help for the functions assigned to the SET or ESC keys in RUN mode.
RUN Mode-MENU Key-[HELP]
Sets the number of display digits past the decimal point.
(default value: varies depending on the connected Sensor Controller.)
Sets the display to normal brightness. (default value)
Suppresses the brightness by reducing current consumption to darken the display.
Turns the display OFF.
Setting Display Method
Description
Description
Section5
ZS-HL
5-25
User's Manual