Omron ZS-HL User Manual page 84

Section5
Setting for Sensing Conditions
Setting
THICK
When you set GLASS (MODE2) or THICK (MODE2) for the measurement object, the following parame-
ters are initialized.
• SMOOTH
• AVERAGE
ZS-HL
5-10
User's Manual
Mode1 Select this mode to measure the thickness of glass at high speed.
Measures the thickness between
(This is not displayed in Multi-Task mode.)
Front side
Backside
Mode2 Select this mode when you want to measure the thickness of glass stably.
This is effective when measuring the thickness of glass having different reflection
factors on the front side
(This is not displayed in Multi-Task mode.)
Front side
Backside
When MODE2 is selected, the measurement area is set for the front side and back-
side of the glass respectively, and an adjustment is performed for a suitable
received light amount for each area.
When you use SmartMonitor ZS, you can adjust the area while checking the
received light amount.
Description
and .
Raw glass Measure the thickness.
and the backside such as backside deposited glass.
Glass with a film
Measure the thickness.
For example,
backside deposited glass.
Mode 1
Automatically
adjusts the
received light
amount.
Area of the front side
Received light amount of the front side
Received light amount of the backside
Area of the backside
Mode 2