Setting Banks; Switching Banks; Copying Banks; Clearing Banks - Omron ZFV-A25-04 User Manual

Section 3

Setting Banks

Setting Banks

The ZFV Series can hold up to eight sets of settings. These settings can be switched
externally when changing the device setup
A set of these settings is called a "bank."

Switching banks

BANK 1 is selected as the default. BANK 2 and 8 are also available.
BANKs can also be switched from an external device.
MENU mode-[BANK]
Setting
BANK 1 to BANK 8
(default value: BANK 1)

Copying banks

Copy the settings of other bank numbers to an already selected bank number.
MENU Mode-[SYS1]-[BANKSET]-[COPY]

Clearing banks

"Clearing" deletes the settings of the currently selected bank number.
MENU Mode-[SYS1]-[BANKSET]-[CLEAR]
[SYS1], [SYS2] settings and RUN Mode display settings cannot be cleared.

Setting the bank switching method

Select how to switch banks.
MENU Mode-[SYS1]-[BANKSET]-[SWITCH]
Setting
KEY (default value)
I/O
ZFV
58
User's Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Setting the bank switching method

Selects the target bank.
Banks are switched by the control keys on Amplifier Unit.
Banks are switched by the control keys on Amplifier Unit and by external sig-
nals.
Switching by external signals is enabled only in the RUN mode.
p.58
Description
Description