Setting The Sensor Load Method; Setting The Display Language; Changing The Way Of Obtaining Banks - Omron ZS-HL User Manual

Section5
Setting the System Environment/Changing the Way of Obtaining Banks

Setting the Sensor Load Method

Set whether or not to load information from the currently connected Sensor Head when the
Sensor Controller is started up.
FUN Mode-[SYSTEM]-[SenINFO]
Setting
LOAD
SAVE

Setting the Display Language

Set the display language of the LCD screen.
FUN Mode-[SYSTEM]-[LANGUAG]
Setting
Japanese
English

Changing the Way of Obtaining Banks

Select the bank contents to be obtained from the settings or judgment value.
FUN Mode-[BANK]-[MODE]
Setting
NORMAL
THRESH
ZS-HL
5-28
User's Manual
Reads the data currently saved on the Sensor Head each time that the Sensor
Controller is started up. (default value)
Data is not read from the Sensor Head when the Sensor Controller is started
up if the same Sensor Head at the previous startup is connected.
When the combination of Sensor Controller and Sensor Head is fixed,
selecting "SAVE" sometimes results in the Sensor Controller starting
up more stably depending on the operating environment.
Displays menus in Japanese. (default value)
Displays menus in English.
"[SENSING] [MEASUREMENT POINT] [FILTER] [OUTPUT] [I/O SET] that are
set in FUN mode", and "the threshold value that is set in TEACH mode" are
regarded as bank data. The number of banks is up to four. (default value)
"The threshold value that is set in TEACH mode" is regarded as bank data.
The number of banks increases up to 32.
Description
Description
Description