3-4 Bank switching
Multi-task and Bank Data
Multi-task Function
With the ZW Series, you can set multiple measurement processing for one sensing setting. This measurement
processing is called a "task (TASK)."
Example: When measuring height and side run-out at the same time
For tasks, TASK1 to TASK4 are available for registration.
You can measure and judge up to four characteristic points simultaneously because you can specify the
desired measurement items such as peak, bottom, and average for each task.
Measurement processing flow in TASK1
Measurement processing flow in TASK4
58
Bank switching
Surface fluctuation (TASK2)
Height (TASK1)
* For the output, the following four types
are supported:
- Analog output
Select one TASK that you want to output.
- Judgment output
Select one TASK that you want to output.
- Binary output
Select one TASK that you want to output.
- Serial output (Ethernet/RS-232C)
Can output data from four tasks at a
time.
ZW User's Manual