Saving The Network Configuration File; Reading A Network Configuration File - Omron DEVICENET SAFETY - SYSTEM CONFIGURATION 07-2009 System Configuration Manual

Saving and Reading Network Configuration Files
3-5-2

Saving the Network Configuration File

3-5-3

Reading a Network Configuration File

Note
66
The network configuration can be saved using either of the following methods.
1. Select File - Save or File - Save As from the menu bar.
2. Click the Save Button on the toolbar.
Either way, the standard Windows dialog box for saving will be displayed.
Select the saving location, name the file, and then click the Save Button.
When saving the file for the first time, the Assign Password Dialog Box will be
displayed. Enter the password to set for the network configuration file.
When saving the second time or after, the Password Confirmation Dialog Box
will be displayed. Enter the password set when the network configuration file
was initially saved.
When saving has completed successfully, the following message will be dis-
played in the Message Pane:
The saved network configuration file can be read for use by the Network Con-
figurator using either of the following methods.
1. Select File - Open from the menu bar.
2. Click the Open Button on the toolbar.
Either way, the standard Windows Open File Dialog Box will be displayed.
Select the file to open, and click the Open Button.
Next, the Check Password Dialog Box will be displayed. Enter the password
set when the network configuration file was saved.
When reading has completed successfully, the following message will be dis-
played in the Message Pane:
If the password does not match, the Network Configurator will open the file in
Protect Mode. In Protect Mode, operations such as saving the file and chang-
ing device status are prohibited. Refer to 3-5-4 Protect Mode for details.
Section 3-5