Omron DEVICENET SAFETY - SYSTEM CONFIGURATION 07-2009 System Configuration Manual page 143

Editing Parameters for Logic Terminals (DST1-XD0808SL-1)
(2) Output from Logic
The result of the internal logic is output to the local output terminal.
The output condition can be selected from the following list.
(The condition depends on the input settings. For example, if Input0
and Input1 are used as a single input, Input0/1 becomes Input0,
Input1.)
Corresponding output terminal is used as single output (e.g., 1 Safety
Relay).
The following options will be displayed.
(1)
(2)
(3)
3. Select the logic condition from the following options.
(1) Output from the Network
Outputs the signal that the logic terminal received from Safety Master.
When this option is selected, the result of the internal logic is ignored.
Section 4-2
109