Omron DEVICENET SAFETY - SYSTEM CONFIGURATION 07-2009 System Configuration Manual page 87

Connecting to the Network
USB, or connection is made to the NE1A-SCPU01-EIP or NE1A-SCPU02-EIP
via USB or Ethernet.
1. Select Network - Select Connect Network Port. The Select Connect Net-
work Port Dialog Box will be displayed.
2. Select the network to be connected, and then click the OK Button. The Se-
lect Connected Network Dialog Box will be displayed.
3. Select the network to be connected, and then click the OK Button.
If an online connection is made normally, On-line will be displayed in the
status bar at the bottom of the window.
A tab for the network to be connected will be displayed in blue as in the
following figure.
Note Until Select Connect Network Port is used again to change the con-
nection destination, the network selected in step 3 (displaying a
blue icon) and related networks (displaying a green icon) will be op-
erable.
Section 3-3
53