Standard Slave Settings; Registering I/O Assemblies For Standard Slaves - Omron DEVICENET SAFETY - SYSTEM CONFIGURATION 07-2009 System Configuration Manual

Standard Slave Settings

5-3

Standard Slave Settings

Note
5-3-1

Registering I/O Assemblies for Standard Slaves

Item
Name
Type
Size
134
Clicking the Slave I/O Tab displays the window for setting a Standard Slave
I/O assembly that is necessary for operating the NE1A-series Controller as a
Standard Slave. The I/O assembly set here is displayed and can be selected
in the Connection Setting Window of, for example, the DeviceNet Unit for a
CS/CJ-series PLC that is a Standard Master.
The I/O tags defined in the I/O assembly can be used in the Logic Editor.
When the NE1A-series Controller is not used as a Standard Slave, it is
not necessary to set the parameters in this window.
Register the I/O assemblies for the Standard Slave to be used when the
NE1A-series Controller functions as a Standard Slave.
The following information is displayed in this window.
The registered I/O assembly name (
( icon) are displayed.
The input/output type for the I/O assembly and data types for the I/O tags are displayed.
I/O assembly size and the sizes of I/O tags are displayed.
Information Displayed
icon) and I/O tags name defined in the assembly
Section 5-3