Locking/Unlocking Devices
Note
Note When locking the configuration, confirm that the network number is
correct.
Be sure to check that the network number is correct. If configuration is not
performed with the correct network number, Safety I/O connections may not
be established. For details on network numbers, refer to 9-5-2 Specifying the
Network Number.
3. Click the Yes Button or the No Button.
A dialog box for entering the device password will be displayed when the
configuration is locked or unlocked.
4. Enter the password of the connected device and click the OK Button.
When completed, the display will return to the Main Window.
This completes the lock/unlock procedure.
5. Click the OK Button to return to the Main Window.
Section 9-14
275