Omron DEVICENET SAFETY - SYSTEM CONFIGURATION 07-2009 System Configuration Manual page 241

Monitoring Functions
Test Output Terminal Status
Safety Input Terminal Status
Safety Output Terminal Status
Dual Channel Safety Input Status
Item
Test Output Value
Test Output Status
Reason for Test Output
Alarm
Item
Safety Input Value Input value to the safety input.
Safety Input Status Evaluation result of the single-channel safety input. "Alarm" is dis-
played if an error occurs.
Safety Input Logical This is the input value after the safety input terminal evaluation. "Off"
Value is displayed if an error occurs.
Reason for Safety Input The cause of the error is displayed.
Alarm
Item
Safety Output Value Output value of the safety output.
Safety Output Monitor Monitoring value of the output for the safety output.
Value
Safety Output Status Evaluation result of the single-channel safety output. "Alarm" is dis-
played if an error occurs.
Reason for Safety Out- The cause of the error is displayed.
put Alarm
For DST1-series Safety I/O Terminals, the following items will be displayed in
addition to the above items.
Item
Dual Channel Safety Evaluation result of the dual-channel safety input. "Alarm" is dis-
Input Evaluation played if an error occurs.
Output value of the test output.
Evaluation result of the test output. "Alarm" is displayed if an error
occurs.
The cause of the error is displayed.
Section 7-1
Description
Description
Description
Description
207