Omron DEVICENET SAFETY - SYSTEM CONFIGURATION 07-2009 System Configuration Manual page 218

Programming
Editing Function Block Parameters Used in User-defined Function Blocks
184
This section describes how to change function block parameters used in user-
defined function blocks.
1. As shown in the following figure, right-click the function block or right-click
the function block list and select Edit parameter of a User defined Func-
tion Block when the menu is displayed.
The following Function Block List Window will be displayed.
2. In the Function Block List Window, select the function block to be edited,
and click the Edit Button. The menu for editing the parameters of the cor-
responding function block will be displayed.
Section 6-3