Omron DEVICENET SAFETY - SYSTEM CONFIGURATION 07-2009 System Configuration Manual page 94

Creating a Virtual Network
Reusing Network Configurations
1,2,3...
60
• When a network in which devices already have a set network number is
uploaded, the value that is already set in the devices will be used for the
network number.
Network configurations can be reused starting from version 2.01. Use the fol-
lowing procedures.
1. Open the project file from which the configuration information is to be re-
used.
2. Select File - Save As from the menu bar. The following dialog box will be
displayed.
3. A Select target network Check Box will be displayed in the Option Area. If
this check box is not selected, the configuration information for all networks
will be saved.
4. Select the check box and click the Save Button. The following dialog box
will be displayed.
5. Select the networks for which the configuration information is to be saved
and click the OK Button. The configuration information for the selected net-
works will be saved in a file.
The configuration information on devices on the selected networks in the vir-
tual networks has now been saved. Use the following procedure to reuse the
configuration information in the file.
Section 3-4