Setting the System Environment
Set the system environment.
Ejecting the Memory Card
Before you eject a Memory Card, be sure to perform this item.
How to Insert and Remove the Memory Card p.2-14
FUN Mode-[SYSTEM]-[EJECT]
Setting
OK
CANCEL
Saving setup data
Bank settings and system settings are saved internally on the Data Storage Unit.
• The settings of all banks are saved regardless of the currently selected bank No.
• After you have made or changed settings, be sure to save the setup data. All settings will be deleted if
you turn the power OFF without saving the data. A message prompting you to save data will be dis-
played if you change a mode without saving data after you have changed settings.
FUN Mode-[SYSTEM]-[SAVE]
Setting
OK
CANCEL
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Readies the Memory Card so that it can be ejected.
Cancels Memory Card eject.
Saves the setup data.
Does not save the setup data.
Setting the System Environment
Description
Description
Section3
ZS-DSU
3-33
User's Manual