Omron DEVICENET SAFETY - SYSTEM CONFIGURATION 07-2009 System Configuration Manual page 131

Editing Parameters
Item
S Dual Channel Safety
Input Discrepancy Time
I/O Comment
Maintenance Counter
Mode Choice
Threshold Mainte-
nance Counter
IMPORTANT When the Safety Input Channel Mode is set to Test Pulse from Test Out, spec-
Settings
0 to 65,530 ms Sets the time to monitor the logic discrepancy
in the dual channel input logic.
(in 10-ms increments)
32 characters max. Sets an I/O comment for the safety input. The
I/O comment set here is used as the I/O tag in
the Logic Editor.
Time (total ON time) Sets the operating mode for the maintenance
counter.
Count (operation count)
0 to 4,294,967,295 Sets the threshold value for the maintenance
hours counter.
ify the test output to use for the test source and set the Test Output Channel
Mode of the test output to Pulse Test Output.
Description
Section 4-1
Default
0 ms
None
Time
0
97