Device Properties - Omron DEVICENET SAFETY - SYSTEM CONFIGURATION 07-2009 System Configuration Manual

Device Parameters and Properties
3-7-4

Device Properties

DeviceNet Network Display Windows
General Tab Page
Safety I/O Information Tab Page
The device information, types of safety I/O and standard I/O, and safety signa-
tures can be checked in the Device Property Dialog Box.
The Device Property Dialog Box can be displayed using any of the following
methods.
1. Select a device, and then select Device - Property from the menu bar.
2. Select a device, and the click the Device Property Button on the toolbar.
3. Select a device, and then right-click the device and select Property.
In this tab page, you can check the device information and change the device
icon displayed in the Network Configuration Pane.
In this tab page, you can check the safety I/O classification information of a
device.
Section 3-7
75