Omron DEVICENET SAFETY - SYSTEM CONFIGURATION 07-2009 System Configuration Manual page 280

Basic Online Operations
Option Settings Browse Network Dialog Box
Browse Response Monitor
Timer
Browse Status
Inputting User Address
after Automatic Ethernet
Scan
246
2. Select the connected device and click the OK Button.
The connected device will be updated, and the system will return to the
Main Window.
Click the Option Button in the Browse Network Dialog Box. The following dia-
log box will be displayed.
The browse response monitor timer specifies the communications timeout
value when the device information is updated in the Browse Network Dialog
Box. The default is 5,000 ms.
You can specify whether to save the status of updated devices in the Browse
Network Dialog Box. If the browse status is set to Save, the status of updated
devices will be held even if the Browse Network Dialog Box is opened again.
The default setting is to not save the status.
You can specify whether to manually input missing IP addresses after the Eth-
erNet/IP network has been scanned. By default, this option is not selected.
(The Maintenance Tool does not support EtherNet/IP networks, and so this
function cannot be used.)
Section 9-5
For information on the Option Button
refer to Option Dialog Box in the
following section.