Table of Contents
Advertisement
Safety Slave Settings
I/O Tag
Note
Setting Tag Names by Bit
Multiple I/O tags can be defined in an I/O assembly. The I/O tags defined here
can be used in the Logic Editor.
• Click the New Button and set a tag name and data type when defining a
new I/O tag. I/O tags for up to 16 bytes can be defined in each I/O assem-
bly.
• To change an I/O tag that has already been defined, select the I/O tag you
want to change and click the Edit I/O Tag Button.
• To delete an I/O tag that has already been defined, select the I/O tag you
want to delete and click the Delete Button.
(1) BOOL (Boolean) data is 1 byte.
(2) I/O tag names and I/O comments (names) cannot consist of only spaces.
A tag can be set for each bit with an NE1A-series Controller with unit version
1.0 or higher (including NE1A-SCPU01-EIP and NE1A-SCPU02-EIP).
1. Select the applicable assembly in the I/O Assembly Setting Window.
Section 5-2
129
Advertisement
Chapters
Table of Contents
