Editing Parameters For Logic Terminals (Dst1-Xd0808Sl-1); Outline - Omron DEVICENET SAFETY - SYSTEM CONFIGURATION 07-2009 System Configuration Manual

Editing Parameters for Logic Terminals (DST1-XD0808SL-1)

4-2 Editing Parameters for Logic Terminals
(DST1-XD0808SL-1)
4-2-1

Outline

Safety I/O Terminal
Logic Terminal
Emergency Stop
Switch
1,2,3...
102
Logic Terminals (DST1-XD808SL-1) can be used with Network Configurator
version 2.0@ or higher.
A Logic Terminal provides built-in logic operations. This feature enables local
outputs to be controlled directly by local inputs, shortening the reaction time.
Network
Configurator
DeviceNet
Safety I/O
communications
Contactor
Safety Light Curtain
One of the following methods can be used to edit parameters for a Logic Ter-
minal.
1. Select a device, and select Device - Parameter - Wizard from the menu
bar.
2. Select a device, and click the Parameter Wizard Button on the toolbar.
3. Right-click the device and select Parameter - Wizard from the pop-up
menu.
Safety Network
Controller
Safety I/O
communications
Safety I/O Terminal
Input Terminal
I/O Terminal
Logic operations
Safety Door Switch
Section 4-2
Standard PLC
DeviceNet
Master Unit
Standard I/O
communications
Contactor
Valve