Omron DEVICENET SAFETY - SYSTEM CONFIGURATION 07-2009 System Configuration Manual page 250

Maintenance Functions (Unit Version 1.0 or Later)
Monitoring Operations from the Network Configurator
216
Any of the following methods can be used to monitor the number of contact
operations in the local inputs, test outputs, or local outputs.
1. Select the device and select Device – Maintenance information from the
menu bar.
2. Select the device and click the toolbar's Maintenance Button.
3. Select the device, right-click that device, and select Maintenance infor-
mation from the popup menu.
4. Select the device, select Device – Monitor from the menu bar, and click
the Maintenance Tab in the displayed window.
5. Select the device, click the toolbar's Device Monitor Button, and click the
Maintenance Tab in the displayed window.
6. Select the device, right-click that device, select Monitor from the popup
menu, and click the Maintenance Tab in the displayed window.
Each I/O point's accumulated contact operations count can be cleared. To
clear the count, select the contact operations count to be cleared and click the
Clear Value Button.
Section 7-2