Omron DEVICENET SAFETY - SYSTEM CONFIGURATION 07-2009 System Configuration Manual page 330

8. Downloading Parameters to a Master Device
The following dialog box will be displayed when the Network Configurator is online.
If you click the Yes Button to download to a master device, the remote I/O communications will start with the
new settings.
Note Device parameters set in the Parameter Wizard can be changed using the parameter edit function.
A-2-4 Manual I/O Allocation
Memory can be manually allocated for slave I/O.
I/O Allocation Tab Page
The following items are set on the I/O Allocation Tab Page.
1. Allocation of I/O memory in the CPU Unit for I/O Memory Blocks 1 and 2
2. Allocation to slaves for each block
The following window will be displayed when you click the I/O Allocation (OUT) or I/O Allocation (IN) Tab.
Item
Registered Device List
Auto Button
Delete Button
296
Displays only devices with valid output or input data of the registered
devices on the General Tab Page.
Allocates unused words to the slaves selected in the Registered Device List
starting from the first unused words.
Releases the words allocated to the selected slaves in the Registered
Device List.
Word address and start bit address
Updates block 1.
Changes block 1 settings
Updates block 2.
Changes block 2 settings
Description
Appendix A