Environmental Safety Issues; Safety Interlocks; Interlocks - 3D Systems ProJet 6000 User Manual

ENVIRONMENTAL SAFETY ISSUES

The following are environmental issues concerning the ProJet™ 6000:
• Controlling waste heat is not required for normal operation of the ProJet™ 6000 .
• When you dispose of materials, refer to the MSDS for that material and follow any applicable local regulations .
• All waste products, (spilled print material, cleaning liquids, etc .) must be disposed of in accordance with all applicable local regula-
tions .

SAFETY INTERLOCKS

Interlocks

Safety interlock devices on the ProJet™ 6000 equipment help prevent accidental laser exposure, electrical shock and crush injuries .
ProJet™ 6000 equipment will not operate unless all safety interlocks are satisfied.
WARNING: Never disable or override any safety interlock device on the ProJet™ 6000 . Operating equipment without
all safety interlocks enabled can cause injury . If you suspect a safety interlock device is not working, do not operate
the ProJet™ 6000 . Disconnect power from the equipment and contact 3D Systems Customer Support for assistance .
3D Systems, Inc.
9